Rank
#1

Durablow MFB TS120 Fireplace Stove Blower Fan Magnetic Ceramic Thermostat Auto Switch ON at 120F (50C), Off at 90F (32C) Approx

  • ▼ Magnetic Thermostat Switch for Fireplace Stove Blower Fan / Kit use, no screws and nuts needed.
  • ▼ Durable quality replacement parts. ▼ Upgraded part used: Stainless Steel #430 + High heat resistant ceramic (white part) thermo sensor.
  • ▼ Thermostat switch activate approximately at 120°F (50°C), shut off approximately at 90°F (32°C)
  • ▼ Ceramic sensor block for better high-temp resistance.
  • ▼ Reminding: Blower will not START until thermostat is heated to approximately 120 °F
Rank
#2

VODA 4.9 inches Height Twin motor Heat Powered Stove Fan [UPDATE VERSION],for Small Space on Log/Wood Burner/Stove/fireplace New Specially Designed Fan

  • COMPACT SIZE--9.8 x 4.9 x 4.9 inches,producing the air flow as 210 CFM,suitable for small space of the stove top.
  • WHISPER AND QUIET--2017 new motor and TEG model[UPDATE VERSION].You don't even know this fan is there,but you FEEL the WARMTH!
  • LONGER LIFETIME--There is a Bi-metallic safety device on the base of the fan.If the surface temperature rises above around 350C(660F),the safety device gently elevates the front of the fan to protect the TEG and motors.
  • No BATTERIES OR ELECTRICITY REQUIRED--The stove fan uses heat from the stove surface to spin,adjust its speed automatically with the stove surface temperature.The recommended temperature is 185F - 660F (85C - 350C).
  • ONE YEAR WARRANTY--Offering you a full refund or a brand new replacement in one month,provide spare parts in one year,if you are not satisfied with it.
Rank
#3

FireplaceBlowersOnline AC Motor Rheostat Variable Speed Control for Fireplace Blowers and Fan Kits | Full Range RPM Speed Adjustment with ON and OFF Positions

  • AC Motor Fan Speed Control, 115 VAC 50/60 Hz, 2.5 AMP, On/Off Positions
  • Includes pig tail leads with fast on connectors
  • Provides infinitely variable speed motor control for Shaded Pole, Permanent Split Capacitor and Universal (AC/DC) motors
  • The variable speed motor control contains an on/off line switch, a high gain RFI noise suppression filter, an adjustable trimpot to set the minimum speed and a flame retardant ABS enclosure.
  • Applications include Fireplace Blowers, Fans and Shaded Pole Motors
Rank
#4

Criditpid Fireplace Stove Blower Fan Variable Rheostat Speed On/Off Switch Control, Fan Speed Control for Fireplace Stove Blower

  • ➤ The Fireplace Stove Blower Fan Variable Rheostat Speed On /Off Switch Control, Fireplace Fan Speed Control. It allows you to control the speed of any fan.
  • ➤ Package includes: rheostat, locking nut, knob, male fast on connectors and double-sided tape. Double-sided tape makes it easier to install. You can stick it to any place where it is convenient for you to use.
  • ➤ Technical Details: 120V ; Frequency: 60HZ ; MAX Consumption: 300W; Rheostat, UL Approved. The adjust range of the fireplace fan speed controller is from 65% to 100%.
  • ➤ The Fireplace Fan Speed Control with two MALE connectors; Wires measure 8" long (can be cut and peeled off). D-Shaped Stem measures 1/4"
  • ➤ Universal Fit - Replacement rheostat variable speed controller used in various fireplace blower kit applications, wood stoves, fans, blowers.
Rank
#5

Magnetic Thermostat Switch for Fireplace Blower Fan, Wood Stove, Gas Log Fireplace, Magnetic Temperature Switch ON at 120F, Off at 90F Approx

  • ★ Included With Purchase - Thermostat limit switch
  • ★ Universal Fit - The thermostat on/off switch used in universal wood stoves, fireplace blower kits, gas log firplaces
  • ★ Very Easy to Install - The thermostat has a magnet instead of having to mount it with screws, attach the magnetic heat sensor to the underside of the firebox.
  • ★ Turns On and Off Automatically - Automatically turns fireplace on and off at set temperature of thermostat switch, you don’t require manual star, adjustment, stops.
  • ★ Specifications - Length x Width x Height (inch): 2.5 x 1.7 x 0.9. Temperature switch closes (turn on) at approximately 120°F and opens (shut off) at approximately 90°F (+/- 5°F tolerance)
Rank
#6

Criditpid Magnetic Thermostat Switch for Fireplace Fan/Fireplace Blower kit, Magnetic Temperature Switch ON at 120F, Off at 90F Approx

  • ★ The Magnetic Thermostat Switch is fit for Fireplace Blower Fan, Wood Stove, Gas Log Fireplace. This fireplace blower switch doesn't need screws and nuts.
  • ➤ The wood stove fan limit switch activate (turn on) at approximately 120°F and shut off at approximately 90°F (+/- 5°F tolerance).
  • ➤ The switch for fireplace blower Specifications - Length x Width x Height (inch): 2 1/2 x 1 3/4 x 1.
  • ➤ The Magnetic Thermostat Switch is Very Easy to Install ! The wood stove blower thermostat has a strong magnet instead of having to mount it with screws, attach the magnetic heat sensor to the underside of the firebox.
  • 💕 Please kindly note that Blower will not start until thermodisc is heated to approximately 120° F, if you have any other questions, please feel free to contact us
Rank
#7

10000mAh 7 inch Battery Operated Clip on Fan Rotatable USB Fan for Baby Stroller Outdoor Camping Tent Beach Treadmill Car Golf Cart

  • Up to 50 Hours Working Battery: Built-in Rechargeable 10000mAh battery, this portable fan runs continuously 2 days without stoppages (low speed), Configured 4 LED Indicator showing the remaining juice of the battery, it’s essential for camping, trip, outdoor working, where power source is always not easy to reach
  • Auto Shut-off Timer: this is the world’s first battery operated personal fan with timer. You can set it to run 1 Hour/2 hours/4 Hours according to your purposes. It’s a energy efficient solution when you take a nap at daytime, sleep at night...especially helpful for baby, pets, elders and those who don't want to blow that long time
  • 360 Degree Angled with Tripod: Fan head adjustable for any angle to circulate air from desired direction; Come with sturdy flexible tripod, making this fan multi purposes: you can use it on your baby stroller, attach it on crib, set it stand as desk fan, wind it on beach umbrella, car seat, tent, yard...anywhere you need air flow
  • Quieter and Powerful: 7-inch large sized fan head with 5 dedicated fan blades, presenting comfortable air to your face, our advanced motor keeps running quiet as usual, it wont disturb you from study , sleep and other activities that require silence ( 3-Speed setting: Low Medium, High)
  • Bright LED Lights: Built in 12 LEDs with Bright White lights and 3 Brightness Settings, you can set the brightest mode as lantern during camping, set Dim as nightlight for sleeping, illuminate a camper or a small room during night/ in darkness
Rank
#8

Heat Powered 4 Blades Stove Fan,Silent Flue Pipe Fireplace Fan, Eco-Friendly on Chimney for Wood Log Burner Fireplace

  • ❤2021 New Upgrade❤New fan blade ,Faster Speed,Larger Air Volume, Lower starting temperature,Lower noise,Motor has a longer service life, More solid and durable,Highest performing.Never need to turn it on or off, Start working automatically when the starting temperature is reached.Reinforced 4 Blades,Made of premium anodized aluminum, the heat-powered stove fan has a higher thermal conductivity efficiency than those steel ones.
  • ❤Working principle❤Heat powered wood stove fans generate power by converting the heat from stove into electricity, electricity generating units convert the heat energy into kinetic energy to drive the motor, then the blades spin.No batteries or electricity required, eco-friendly.
  • ❤ Energy saving❤ the thermoelectric module acts as a small generator to power the fan motor. No batteries or electricity needed! The improved hot air circulation and ensures greater comfort ,while reduces the wood consumption of the stove.
  • ❤Space saving ❤The stove fan can be Fixed on the chimney Pipe of Wood/Log Burner/Fireplace , it is stable for Incline surface and won't take up more space.
  • ❤Quiet, no noise❤ The only moving part is the blade assembly, quiet and no noise generate. You will not even know this fan is there, but you will feel the warmth. Please feel free to contact us if you have any question.
Rank
#9

5 Blades Stove Fan Heat Powered Fireplace Fan Hanging on Chimney Pipe for Wood Log Burner Fireplace Slient Efficiently Heat Distribution Eco-Friendly with Thermometer

  • [WORKING PRINCIPLE] 5 Blades Heat Powered Stove Fan drives the motor by converting the heat energy of the stove into kinetic energy, and then the blades rotate. Fireplace fan working automatically, controlled by temperature of the stove top.When the temperature is above 50 ℃, the fan starts to rotate, and when the temperature is below 50 ℃, the fan slowly stops rotating. When the temperature increases, the fan will spin faster, when the temperature decreases, the fan will spin slower.
  • [ENERGY SAVING] The stove pipe heater fan not need batteries and electricity, make full use of the heat from the furnace, burn less fuel, environmentally friendly. More efficiently and quickly disperse heat throughout your room, allowing hot air to circulate better throughout the room, no need to sit so close to the stove.
  • [SPACE SAVING] The pellet stove pipe fan heat powered easy to install, different from regular stove fan, the 5-blade stove fan can be attached directly to the chimney pipe of the wood stove, log burner or fireplace, very stable and save more space. Whether it is wood burning stove, log burner or fireplace, the stove fan is very useful.
  • [SILENT OPERATION] Whisper work, low noise. Wood burning stove fan normal working noise below 25db. You can enjoy the warm air in a quiet and comfortable environment.
  • [PREMIUM QUALITY] The pipe mounted wood stove fan made of anodized aluminum, wear-resistant and anti-rust. Overheating protection, the built-in bimetallic belt at the bottom of the stove fan is designed to slightly raise the edge of the fan when it is close to the maximum operating temperature to protect the fireplace fan. A thermometer is included to measure the temperature of the furnace and ensure the safety of the 5 blades stove fan.
Rank
#10

Heat Powered 5 Blades Stove Fan Hanging on Chimney Fireplace Fan Silent Operation for Wood Log Burner Fireplace Eco Friendly and Efficient Heat Distribution with Stove Thermometer

  • [WORKING PRINCIPLE] The new upgraded design, heat powered, does not need batteries and electricity or other energy, through thermal energy to kinetic energy, drive the fireplace fan rotation, burn less fuel, get more heat. Protect the environment and save energy. Quickly and efficiently disperse heat into your room.
  • [WORKING TEMPERATURE] Never need to turn it on or off, Start working automatically. When the temperature reaches 50°C(122°F ), the fan starts to rotate. When the temperature is lower than 50°C(122°F ), the fan slowly stops rotating. The higher the temperature of the furnace, the faster the blades rotate. The operating temperature range is 122°F - 662°F (50°C - 350°C). Always use a fireplace thermometer to measure the temperature of the stove and make sure it stays within this range.
  • [WHISPER QUIET] The fireplace fan silent operation. The only moving part is the blade assembly, The stove fan works at less than 25 db. So that you can enjoy the warm air in a quiet and comfortable environment.
  • [PREMIUM QUALITY] The material is anodized aluminum, wear-resistant and anti-rust. Overheating protection, the in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly and reduce the contact area of the heat source as the maximum operating temperature is approached to protect the motor and the moelectric module.
  • [SPACE SAVING] Easy to install, the 5-blade stove fan can be attached directly to the chimney pipe of the wood stove, log burner or fireplace, can save more space. If you have any further questions, please do not hesitate to contact us.
Rank
#11

Criditpid Magnetic Thermostat Switch with High Temperature Resistant Wire for Fireplace Blower Fan kit /Fireplace Stove Fan, Magnetic Temperature Switch ON at 120F, Off at 90F Approx

  • 【Designed for Fireplace Stove Blower Fan】: Magnetic Thermostat Switch with High Temperature Resistant Wire, ideal to use for Fireplace Blower Fan, Wood Stove, Gas Log Fireplace; Easy to use - no screws and nuts needed.
  • 【Automatic Magnetic Temp Switch】: "ON" at 120℉, "OFF" at 90℉. This temperature switch activate (turn on) at approximately 120°F and shut off at approximately 90°F (+/- 5°F tolerance). Please kindly note that Blower will not start until thermodisc is heated to approximately 120° F.
  • 【Compact Size】: The Magnetic Temp Sensor measures 2 1/2-inches in length by 1-3/4-inches in width. 【Extra Strong Magnet】: Magnetic base with strong magnet is easy to install in a place where you couldn't drill to mount and can move to different places.
  • 【Premium High Temperature Resistant Wire】: The wires is constructed with female connectors on both ends, built-in enameled copper and PVC jacket to ensure extra protection and durability.
  • 【What You Get】: 1 Magnetic Thermostat Switch and 2 High Temperature Wire for fireplace blower and fan kit applications, Welcome Guide and friendly customer service provided.
Rank
#12

Yiming Magnetic Thermostat Switch for Fireplace Blower Fan, Wood Stove, Gas Log Fireplace, Circuit On At 120F and Off At 90F.

  • ★ Universal Fit - The magnetic thermostat on/off switch used in universal wood stoves, fireplace blower kits, gas log firplaces. Such as Heat N Glo, Heatilator, Majestic, Desa Tech, Regency fireplace.
  • ★ Very Easy to Install - The fireplace thermostat has a magnet instead of having to mount it with screws, attach the magnetic heat sensor to the underside of the firebox.
  • ★ Turns On and Off Automatically - Automatically turns fireplace on and off at set temperature of thermostat switch, you don’t require manual star, adjustment, stops.
  • ➤ The wood stove fan limit switch activate (turn on) at approximately 120°F and shut off at approximately 90°F (+/- 5°F tolerance).
  • 💕 Please kindly note that Blower will not start until thermodisc is heated to approximately 120° F, if you have any other questions, please feel free to contact us
Rank
#13

Yiming Magnetic Thermostat Switch with High Temperature Resistant Wire for Fireplace Blower Fan, Wood Stove, Gas Log Fireplace, Circuit On At 120F and Off At 90F.

  • ★ Universal Fit - The magnetic thermostat on/off switch with high temperature resistant wire, used in universal wood stoves, fireplace blower kits, gas log firplaces. Such as Heat N Glo, Heatilator, Majestic, Desa Tech, Regency fireplace.
  • ★ Very Easy to Install - The fireplace thermostat has a magnet instead of having to mount it with screws, attach the magnetic heat sensor to the underside of the firebox.
  • ★ Turns On and Off Automatically - Automatically turns fireplace on and off at set temperature of thermostat switch, you don’t require manual star, adjustment, stops.
  • ★ The wood stove fan limit switch activate (turn on) at approximately 120°F and shut off at approximately 90°F (+/- 5°F tolerance).
  • ★ What You Get: 1 Magnetic Thermostat Switch and 2 High Temperature Wire for fireplace blower fan kit. The wires is constructed with female connectors on both ends, built-in enameled copper and PVC jacket to ensure extra protection and durability.
Rank
#14

Hongso Magnetic Thermostat Switch with High Temperature Resistant Wire for Fireplace Blower Fan kit /Fireplace Stove Fan, ON at approximately 120F and OFF at approximately 90F

  • Magnetic Thermostat Switch for Fireplace Stove Blower Fan / Kit use, no screws and nuts needed. High Temperature Resistant Wires and Connectors Included.
  • Temperature switch closes (turn on) at approximately 120°F and opens (shut off) at approximately 90°F (+/- 5°F tolerance)
  • Measures 2 1/2-inches in length by 1-3/4-inches in width.
  • Strong magnet! Easy and simple to place! Perfect for fireplace blower and fan kit applications
  • NOTE: Blower will not start until thermodisc is heated to approximately 120° F.
*Disclaimer: Fire-Dancing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking. (255920)